Edward spaulders Discontinued

84,95 €*

% 169,90 €* (ahorro del 50%)

Precios con IVA incluido, más gastos de envío

Tiempo de entrega 2-5 días

Color

blanco

bruñido con un borde en blanco

Número de producto: 986275

Nuestras ventajas

Envío gratuito a partir de 100€ (DE)
Envío exprés en 24h (DE)
Elija entre más de 5.000 artículos

Información sobre el producto "Edward spaulders Discontinued"

Discontinued, only while stocks last

This pair of massive spaulders is built with additional blade turners attached on top of the shoulder parts. This makes every wearer appear even bigger. The spaulders are built from two parts (shoulder and upper arm) and are being attached on the collar or torso of an exsisting armour and fixed to the wearers upper arm to hold them in place. This way they stay in place and will disturb the wearers movement only a little.

The spaulders are made in the style of the "Edward" armour: a ridge along the edge and many decorative rivets surrounding it. The pieces for the upper arm are something very special: they are built anatomically, so that they rest on the upper arm very tight and comfortably.

Material: 1,2mm steel
Colour: blank, browned with blank edges

Kunden haben sich auch angesehen

Edward greaves Discontinued

Discontinued, only while stocks last These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration. The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps. Material: 1,2mm steel Colour: blank, browned with blank edges

Variantes de 34,95 €*

39,95 €* 79,90 €* (ahorro del 50%)

Edward bracers Discontinued

Discontinued, only while stocks last These bracers are made with a cut out for the inner elbow, so that the wearer can bent his arm all the way without the bracers interfearing with the movement. Additionally they are built with a ridge along the edge and a surrounding pattern of rivets. The bracers have a bigger inner diameter, so that they can be worn on top of a gambeson and even a chain mail. A great way to built up a heavy plate armour. Material: 1,2 mm steelLength: 28 cm

Variantes de 29,95 €*

34,95 €* 69,90 €* (ahorro del 50%)

Edward helmet Discontinued

Discontinued, only while stocks last The matching helmet to our armor series Edward. Its design is based on historical great helmets, but with more dynamic shaped eye slits. Like all pieces from this series the offset beading and the decorative rivets make it a real eye-catcher.The helmet has a circumference of 60cm to 62cm, so it is made for larger heads.Material: Steel 1,2mmColour: blank, browned with blank edges

Variantes de 99,90 €*

109,90 €*

Kunden kauften auch

Edward bracers Discontinued

Variantes de 29,95 €*

34,95 €* 69,90 €* (ahorro del 50%)

Edward full arm guard Discontinued

Discontinued, only while stocks last The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.Material: 1.2mm steelColours: blank, browned with blank edges

Variantes de 64,95 €*

74,95 €* 149,90 €* (ahorro del 50%)

Edward full legguard browned with blank edges Discontinued

Discontinued, only while stocks last The "Edward" series full leg guards was built large enough even for bigger heroes. This way it can be worn even on top of padded thigh guards and completes many full plate armours. It is being tied to the wearer by using a belt for the two laces and attached to the leg and knee with buckle-straps. The knees outer side is closed by a shell (knee-plate), so that blows and strikes can not cut the important parts. The leg guards ends just below the knee and can therefore be worn with greaves or seperatly: both ways are possible and depend on the wearers' decision. Material: 1.2mm steel

64,95 €* 129,90 €* (ahorro del 50%)

Zuletzt angesehen

Recomendación

Fletcher Vest

The vest „Fletcher“ from our „7 Seas“- series is fashioned in a typcial Burda-Cut. „Fletcher“ is short and sleeveless, which makes it possible to wear a shirt underneath comfortably. With its buttons from brass, the vest can be worn opened or closed equally. Cuttings at the sides provide agility, furthermore the width of the vest can be adjusted through a strap at the back. The pockets in the front are just implied for decoration. „Fletcher“ is suitable for any Pirate or Seamen character and can be neatly combined with one of our shirts (e. g. „Tilly“). Material: 100% cotton

39,90 €*

Tilly vest premium cotton brown Discontinued

Discontinued, only while stocks lastThe "Tilly" vest premium cotton is made in the style of the 17th century with a long cut and may be closed by means of ornamental buttons in the front.Material: Premium cottonSizes: S-XXL

39,95 €* 79,90 €* (ahorro del 50%)

Ranulf Thorsberg trousers herringbone olive LIMITED EDITION

Limited Edition, only while stocks last! Thorsberg trousers were named after their place of discovery, the Thorsberg moor (Schleswig-Holstein, Germany). Their cut is considered the basic pattern of early medieval men's trousers in Europe and was found in that as well as similar styles even centuries later. "Ranulf" is what we call our version, which is made from strong linen. It is comfortably tailored and offers great freedom of movement. Modelled on the historical cut, it has neither fly nor drawstrings or a button. It is worn using a belt or length of rope, for which it offers firmly sewn belt loops. These trousers are perfectly suited for Nordic and early medieval character portrayals. However, there are many other outfit ideas you can realize with these simple yet comfortable trousers. Material: herringbone (30% polyester, 30% acrylic, 21% wool, 13% cotton, 6% viscose)

29,95 €* 59,90 €* (ahorro del 50%)